Filter
Top Products
Figure 70. Removing and installing the control panel module
1. screw (2) 2. plastic pull tab
3. control panel cable 4. control panel connector
5. control panel board 6. notch
7. control panel module
Next steps
1. Install the control panel module.
2. Follow the procedure listed in After working inside your system.
Related Tasks
Installing the control panel module
Installing the control panel module
Prerequisites
NOTE: This is a Field Replaceable Unit (FRU). Removal and installation procedures should be
performed only by Dell certified service technicians.
CAUTION: Many repairs may only be done by a certified service technician. You should only
perform troubleshooting and simple repairs as authorized in your product documentation, or as
directed by the online or telephone service and support team. Damage due to servicing that is
not authorized by Dell is not covered by your warranty. Read and follow the safety instructions
that came with the product.
1. Ensure that you read the Safety instructions.
2. Follow the procedure listed in Before working inside your system.
3. Keep the Phillips #1 screwdriver ready.
151