Filter
Top Products
Item Indicator, button, or
connector
Icon Description
the back flashes until one of the buttons is pressed
again.
Press the system identification button to turn the
system ID on or off.
If the system stops responding during POST, press
and hold the system ID button for more than five
seconds to enter BIOS progress mode.
To reset iDRAC (if not disabled in F2 iDRAC setup),
press and hold the button for more than 15
seconds.
5 Control panel Consists of the health indicator, ambient air
temperature sensor, power-on indicator, power
button, and the system identification button.
Back panel features and indicators
Figure 2. Back panel features and indicators—PowerEdge C4130
Item Indicator, button, or
connector
Icon Description
1 System identification
button
The identification button on the front and back
panels can be used to locate a particular system
within a rack. When one of these buttons is
pressed, the corresponding system identification
button on the back flashes until one of the buttons
is pressed again.
Press the system identification button to turn the
system ID on or off.
If the system stops responding during POST, press
and hold the system ID button for more than five
seconds to enter BIOS progress mode.
11