Dell C4130 Server User Manual


 
Figure 47. Removing and installing a GPU blank
1. guide pin on the front inner wall of the
chassis (2)
2. slot on the GPU blank (2)
3. GPU blank 4. guide holes on the back of the GPU
blank (2)
5. guide pin on the chassis (2)
Removing a GPU riser cable from the system board
Prerequisites
NOTE: This is a Field Replaceable Unit (FRU). Removal and installation procedures should only be
done by Dell certified service technicians.
CAUTION: Many repairs may only be done by a certified service technician. You should only
perform troubleshooting and simple repairs as authorized in your product documentation, or as
directed by the online or telephone service and support team. Damage due to servicing that is
not authorized by Dell is not covered by your warranty. Read and follow the safety instructions
that came with the product.
CAUTION: The GPU riser cables should be removed before removing the GPUs to prevent pin
damage in the GPU connectors on the system board.
1. Ensure that you read the Safety instructions.
2. Follow the procedure listed in Before working inside your system.
121