Filter
Top Products
Figure 32. Removing and installing a 2.5 inch cabled hard drive (hard drive 0/E and hard drive 1/F) from
the hard drive cage
1. hard drive 1/F 2. power and signal cable connector (2)
3. power and signal cable connector on
hard drive
4. hard drive 0/E
5. screw (8) 6. hard drive cage
3. If you want to remove hard drives 2/C and 3/D, perform the following steps:
a. Remove hard drives 0/E and 1/F.
b. Disconnect the signal/power cables from hard drive 2/C and 3/D.
c. Remove the signal/power cables routed through the cable clip on the hard drive cage.
d. Lift hard drive 2/C out of the hard drive cage.
e. Slide hard drive 3/D out of the hard drive cage.
94