Filter
Top Products
Next steps
Remove the GPU riser cable board.
Related Tasks
Removing a GPU riser cable board
Removing a GPU riser cable board
Prerequisites
NOTE: This is a Field Replaceable Unit (FRU). Removal and installation procedures should be
performed only by Dell certified service technicians.
CAUTION: Many repairs may only be done by a certified service technician. You should only
perform troubleshooting and simple repairs as authorized in your product documentation, or as
directed by the online or telephone service and support team. Damage due to servicing that is
not authorized by Dell is not covered by your warranty. Read and follow the safety instructions
that came with the product.
1. Ensure that you read the Safety instructions.
2. Keep the Philips #2 screwdriver ready.
3. Remove the GPU from the chassis. For more information, see Removing a GPU.
4. Disconnect the power cables connected to the GPU.
Steps
1. Remove the screws securing the GPU riser cable board to the GPU.
2. Pull the GPU riser cable board to disengage the connector on the GPU riser cable board from the
GPU.
3. Remove the GPU riser cable routed through the GPU riser cable clip.
124