Filter
Top Products
uSATA SSDs
The PowerEdge C4130 supports up to two 1.8 inch uSATA Solid State Drives (SSDs). The uSATA SSDs
connect to the system board through the hard drive backplane.
NOTE: Use only SSDs that have been tested and approved for use with the hard drive backplane.
When you format an SSD, allow enough time for the formatting to be completed. High-capacity SSDs
can take a number of hours to format.
Removing a 1.8 inch uSATA SSD blank
Prerequisites
1. Ensure that you read the Safety instructions.
CAUTION: To maintain proper system cooling, all empty SSD slots must have SSD blanks
installed.
Steps
Press the release button and slide the SSD blank out of the SSD slot.
Figure 36. Removing and installing a 1.8 inch SSD blank
1. SSD blank 2. release button
Next steps
Install the 1.8 inch uSATA SSD carrier or SSD blank.
Related Tasks
Installing a 1.8 inch uSATA SSD carrier
Installing a 1.8 inch uSATA SSD blank
99