Filter
Top Products
Figure 39. Removing and installing an expander card
1. screw 2. expander-card cable connector that
connects to the connector on the
system board (J_PERC)
3. expander card cable 4. standoff (3)
5. expander card
Next steps
1. Install the expander card.
Related Links
Installing an expander card
Removing the sled
Removing the hard drive/SSD cage
Removing a 2.5 inch (x8) SATA hard drive/SSD backplane
Removing a 2.5 inch (x8) SAS hard drive/SSD backplane
Removing a 2.5 inch (x6) SATA hard drive/SSD plus 2.5 inch (x2) PCIe SSD backplane
Removing a 1.8 inch (x16) SAS SSD backplane
105