Filter
Top Products
Menu Item Description
option is set to Enabled. You can disable this option for applications that
require high utilization of random memory access.
Hardware Prefetcher Enables or disables the hardware prefetcher. By default, the Hardware
Prefetcher option is set to Enabled.
DCU Streamer Prefetcher Allows you to enable or disable the Data Cache Unit (DCU) streamer
prefetcher. By default, the DCU Streamer Prefetcher option is set to
Enabled.
DCU IP Prefetcher Enables or disables the Data Cache Unit (DCU) IP prefetcher. By default,
the DCU IP Prefetcher option is set to Enabled.
Execute Disable Enables or disables the execute disable memory protection technology
feature. By default, the Execute Disable option is set to Enabled.
Logical Processor Idling Enables or disables the operating system capability to put logical
processors in the idling state in order to reduce power consumption. By
default, the option is set to Disabled.
Configurable TDP Allows reconfiguration of Thermal Design Power (TDP) to lower levels.
TDP refers to the maximum amount of power the cooling system is
required to dissipate.
X2Apic Mode Enables or disables the X2Apic mode.
Dell Controlled Turbo
NOTE: Depending on the number of installed CPUs, there may be
up to four processor listings.
Controls the turbo engagement. Enable this option only when System
Profile is set to Performance.
Number of Cores per
Processor
Controls the number of enabled cores in each processor. By default, the
Number of Cores per Processor option is set to All.
Processor 64-bit Support Specifies if the processor(s) support 64-bit extensions.
Processor Core Speed Displays the maximum core frequency of the processor.
Processor 1
NOTE: Depending on the number of installed CPUs, there may be
up to four processor listings. The following settings are displayed for
each processor installed in the system.
Family-Model-Stepping Displays the family, model and stepping of the processor as defined by
Intel.
Brand Displays the brand name reported by the processor.
Level 2 Cache Displays the total L2 cache.
Level 3 Cache Displays the total L3 cache.
Number of Cores Displays the number of cores per processor.
SATA Settings screen
You can use the SATA Settings screen to view the SATA settings of SATA devices and enable RAID on
your system.
To view the SATA Settings screen click System Setup Main Menu → System BIOS → SATA Settings.
21