Filter
Top Products
Steps
1. Align the two screw holes on the rSPI card with the standoffs on the system board.
2. Install the two screws to secure the rSPI card to the system board.
Next steps
1. Follow the procedure listed in After working inside your system.
Related Links
Removing the rSPI card
Removing the rSPI card
Installing the sled
SD vFlash card
You can use an SD vFlash card with your system. The card slot is located on the IDSDM card. You can
remove and install the SD vFlash card
Replacing the SD vFlash card
Prerequisites
CAUTION: Many repairs may only be done by a certified service technician. You should only
perform troubleshooting and simple repairs as authorized in your product documentation, or as
directed by the online or telephone service and support team. Damage due to servicing that is
not authorized by Dell is not covered by your warranty. Read and follow the safety instructions
that came with the product.
1. Ensure that you read the Safety instructions.
2. Follow the procedure listed in Before working inside your system.
Steps
1. If installed, remove the SD vFlash card from the card slot.
NOTE: The SD vFlash card slot is below the NDC.
2. Insert the contact-pin end of the SD card into the card slot on the VFlash media unit.
NOTE: The slot is keyed to ensure correct insertion of the card.
3. Press inward on the card to lock it into the slot.
68