Filter
Top Products
NOTE: You must remove the cooling shroud to replace a faulty cooling shroud or service other
components inside the system.
Steps
1. Align the slots on the side of the cooling shroud with the standoffs on the cooling shroud retention
bar.
2. Lower the cooling shroud into the system until the slots on the cooling shroud engage with the
standoffs on the cooling shroud retention bar.
3. Slide the cooling shroud to the lock position.
4. Tighten the retention screw to secure the cooling shroud on the cooling shroud retention bar.
Next steps
Follow the procedure listed in After working inside your system.
Related Links
Removing the cooling shroud
Installing the sled
Cooling shroud retention bar
Removing the cooling shroud retention bar
Prerequisites
CAUTION: Many repairs may only be done by a certified service technician. You should only
perform troubleshooting and simple repairs as authorized in your product documentation, or as
directed by the online or telephone service and support team. Damage due to servicing that is
not authorized by Dell is not covered by your warranty. Read and follow the safety instructions
that came with the product.
NOTE: You must remove the cooling shroud retention bar to replace a faulty retention bar or
service other components inside the system.
1. Ensure that you ready Safety instructions.
2. Follow the procedure listed in Before working inside your system.
3. Keep the #1 and #2 Phillips screwdrivers ready.
4. Remove the cooling shroud.
Steps
1. Remove the screws securing the cooling shroud retention bar to the system.
2. Hold the cooling shroud retention bar on the side of the chassis and lift it away from the system.
43