Filter
Top Products
Removing a 2.5 inch hard drive/SSD from a 2.5 inch hard drive/SSD carrier
Prerequisites
CAUTION: Many repairs may only be done by a certified service technician. You should only
perform troubleshooting and simple repairs as authorized in your product documentation, or as
directed by the online or telephone service and support team. Damage due to servicing that is
not authorized by Dell is not covered by your warranty. Read and follow the safety instructions
that came with the product.
1. Ensure that you read the Safety instructions.
2. Keep the #1 Phillips screwdriver ready.
Steps
1. Remove the four screws from the slide rails on the hard drive/SSD carrier.
2. Slide the hard drive/SSD out of the hard drive/SSD carrier.
Figure 30. Removing and installing a 2.5 inch hard drive/SSD in a 2.5 inch hard drive/SSD carrier
1. screw (4) 2. hard drive/SSD
3. hard drive/SSD carrier 4. screw hole (4)
Next steps
Install a new 2.5 inch hard drive/SSD in a 2.5 inch hard drive/SSD carrier. See Installing a 2.5 inch hard
drive/SSD in a 2.5 inch hard drive/SSD carrier.
83