Filter
Top Products
Figure 36. Removing and installing a 2.5 inch (x6) SATA hard drive/SSD plus 2.5 inch (x2) PCIe SSD
backplane
1. slot on the SATA hard-drive/SSD
backplane cable
2. standoff on the chassis
3. SATA hard-drive/SSD backplane cable 4. retention clip
Next steps
1. Install the hard drive/SSD backplane.
Related Links
Installing a 2.5 inch (x6) SATA hard drive/SSD plus 2.5 inch (x2) PCIe SSD backplane
Removing the sled
Installing a 2.5 inch (x6) SATA hard drive/SSD plus 2.5 inch (x2) PCIe SSD
backplane
Prerequisites
CAUTION: Many repairs may only be done by a certified service technician. You should only
perform troubleshooting and simple repairs as authorized in your product documentation, or as
directed by the online or telephone service and support team. Damage due to servicing that is
not authorized by Dell is not covered by your warranty. Read and follow the safety instructions
that came with the product.
1. Ensure that you read the Safety instructions.
2. Keep the #2 Phillips screwdriver ready.
3. Remove the hard drive/SSD backplane.
NOTE: You must remove the hard drive/SSD backplane to replace a faulty hard drive/SSD
backplane or service other components inside the system.
96