Filter
Top Products
Steps
1. Press the release button on the sled handle to unlock the sled handle.
2. Rotate the sled handle away from the sled to disengage the sled from the midplane connectors.
3. Slide the sled out of the enclosure.
CAUTION: To protect the I/O connector pins, install the I/O connector cover every time a
sled is removed from the enclosure.
4. Install the I/O connector cover over the I/O connector.
CAUTION: If you are permanently removing the sled, install a sled blank. Operating the
system for extended periods of time without a sled blank installed can cause the enclosure to
overheat.
Figure 5. Removing and installing the sled
1. sled handle 2. sled
3. FX2/FX2s enclosure
Related Links
Installing the sled
Installing the sled
Prerequisites
CAUTION: Many repairs may only be done by a certified service technician. You should only
perform troubleshooting and simple repairs as authorized in your product documentation, or as
directed by the online or telephone service and support team. Damage due to servicing that is
not authorized by Dell is not covered by your warranty. Read and follow the safety instructions
that came with the product.
CAUTION: To prevent damage to the I/O connectors, do not touch the connectors or the
connector pins.
NOTE: Before installing the sleds, place the enclosure in the location that you want.
38