Filter
Top Products
Figure 37. Removing and installing a 1.8 inch (x16) SAS SSD backplane
1. power cable 2. alignment pin
3. retention screw on the top of the
backplane (3)
4. backplane cable (2)
5. backplane cable connector that connects
to the connector on the expander card
6. backplane
7. guide pin (3) 8. backplane cable connector that
connects to the connector on the
system board
9. SSD cage
Next steps
1. Install the SSD backplane.
Related Links
Installing a 1.8 inch (x16) SAS SSD backplane
Removing the sled
99