Filter
Top Products
Adding Parts 101
8 Remove the two green plastic rails from the inside of the hard-drive
bay by gently pulling the rails up and out of the bay.
9 Attach the rails to the hard drive using the two screws attached to the
rails.
Ensure that the rail tabs are positioned at the back of the hard drive.
NOTICE: Do not install any drive into the lower hard-drive bay until you have
removed the green drive rails from the inside of the hard-drive bay.
10
Remove the first hard drive from the upper bay and install it in the
lower bay:
a Disconnect the power and the hard-drive cables from the back of
the first hard drive.
b Press in the two green rail tabs and pull the first hard drive out of
the upper bay.
c Gently slide the first hard drive into the lower bay until you hear a
click.
d Reconnect the power and hard-drive cables to the back of the first
hard drive.
11 Gently slide the new hard drive into the upper bay until you hear a
click.
rail tabs (2)
second hard drive
in upper bay
hard drive bay
first hard drive in
lower bay