Filter
Top Products
Adding Parts 89
7 If you are installing a new card, remove the filler bracket to create a
card-slot opening. Then continue with step 9.
8 If you are replacing a card that is already installed in the computer,
remove the card.
If necessary, disconnect any cables connected to the card. Grasp the
card by its top corners, and ease it out of its connector.
9 Prepare the card for installation.
See the documentation that came with the card for information on
configuring the card, making internal connections, or otherwise
customizing it for your computer.
CAUTION: Some network adapters automatically start the
computer when they are connected to a network. To guard against
electrical shock, be sure to unplug your computer from its
electrical outlet before installing any cards. Verify that the
standby power light on the system board is off.
card
edge
connector
card
connector
lever
retention arm
filler
bracket