Filter
Top Products
96 Adding Parts
www.dell.com | support.dell.com
4 Open the computer cover (see page 84).
5 Press out the securing clip at each end of the memory module
connector.
6 Grasp the module and pull up.
If the module is difficult to remove, gently ease the module back and
forth to remove it from the connector.
Adding a Memory Module
1 Shut down the computer (see page 33).
NOTICE: To disconnect a network cable, first unplug the cable from your
computer and then unplug it from the network wall jack.
2
Turn off any attached devices and disconnect them from their
electrical outlets.
3 Disconnect the computer power cable from the wall outlet, and then
press the power button to ground the system board.
4 Open the computer cover (see page 84).
5 Press out the securing clip at each end of the memory module
connector.