Filter
Top Products
82 Adding Parts
www.dell.com | support.dell.com
NOTICE: Before touching anything inside your computer, ground yourself by
touching an unpainted metal surface, such as the metal at the back of the
computer. While you work, periodically touch an unpainted metal surface to
dissipate any static electricity that could harm internal components.
7
Pull the arms toward you until they snap into position.
If the hinge arms do not snap back into position on the first attempt,
slightly reposition the arms and try again.
8 After the hinge arms snap into position, lower and raise the arms two
or three times to properly seat them.
9 Reattach the front-panel insert.
10 Reconnect the computer power cable to the electrical outlet.
11 Reattach the front door (see page 80).
hinge arms in
horizontal
position
pivot bar
view slots (2)
pivot-bar slots (2)