Filter
Top Products
Adding Parts 107
Closing the Computer Cover
1 Ensure that all cables are connected, and fold cables out of the way.
Gently pull the power cables toward you so that they do not get caught
underneath the drives.
2 Ensure that no tools or extra parts are left inside the computer.
3 Close the cover:
a Pivot the cover down.
b Press down on the right side of the cover until it closes.
c Press down on the left side of the cover until it closes.
d Ensure that both sides of the cover are locked. If not, repeat step 3.
NOTICE: To connect a network cable, first plug the cable into the network
wall jack and then plug it into the computer.
4
Connect your computer and devices to electrical outlets, and turn
them on.