Filter
Top Products
IM584000300 Installation Instructions
Issue AB, April 3, 2013 Spec. No. 584000300 (Model 4015-X003)
Page 16 Chapter 3. Making Electrical Connections
This document is property of Emerson Network Power, Energy Systems, North America, Inc. and contains confidential and proprietary information owned by Emerson Network Power, Energy
Systems, North America, Inc. Any copying, use, or disclosure of it without the written permission of Emerson Network Power, Energy Systems, North America, Inc. is strictly prohibited.
Figure 3-2
Individual Cable Landing Points – Sub-Racks
Removable
Panel
Power and Control Sub-Rack DC
Output Leads to Distribution Sub-Rack
to Power and Control
Sub-Rack Battery Terminals
Return Bar Grounding Point
(19mm [0.75"] Conduit Opening)
(NPG Configurations Only)
Note: This connection can be
made here or on the power
and control sub-rack.
Rear
Power and Control Sub-Rack
DC Output Leads Openings
for 32mm (1.25”) Conduit
Battery Leads Openings for
19mm (0.75”) Conduit
(top and bottom)
Distribution
Sub-Rack
Power and
Control
Sub-Rack
Battery
Tray
DC Distribution Leads Openings
for 25mm (1”) Conduit
(snap bushings are furnished
for use without conduit)
AC Input Leads Opening
for 25mm (1”) Conduit
Alarm Leads Opening
for 25mm (1”) Conduit