Filter
Top Products
Safety Instructions
2-5
R4C428_V2
long.bk Rev_C
A5 size SAFE.FM
1/14/00 Pass 2
R
Proof Sign-off:
tantoname _______
leadername _______
editorname _______
❏
Before transporting the Stylus Scan, make sure the print head
is in the home (far right) position and the ink cartridges are
in place.
When handling the ink cartridges
❏
Keep ink cartridges out of the reach of children. Do not allow
children to drink from or otherwise handle the cartridges.
❏
If ink gets on your skin, wash it off with soap and water. If it
gets into your eyes, flush them immediately with water.
❏
Do not shake the ink cartridges; this can cause leakage.
❏
Install the ink cartridge immediately after you remove it from
its package. Leaving the cartridge unpacked for a long time
before use may result in reduced print quality.
❏
Once you install an ink cartridge, do not open the clamp or
remove the cartridge except to replace it with a new one.
Otherwise, the cartridge may become unusable.
❏
Do not use an ink cartridge beyond the date printed on the
cartridge carton. For best results, use up the ink cartridges
within six months of installing them.
❏
Do not dismantle the ink cartridges or try to refill them. Doing
so may damage the print head.
When choosing a place for the Stylus Scan
❏
Place the EPSON Stylus Scan on a flat, stable surface that
extends beyond the Stylus Scan base in all directions. The
Stylus Scan will not operate properly if it is tilted or at an
angle.
❏
Avoid places subject to rapid changes in temperature and
humidity. Also, keep the Stylus Scan away from direct
sunlight, strong light, and heat sources.