Filter
Top Products
18 Loading Paper
7. Set the adjust lever to the ^ position.
8. Before printing, select Manual as the Source
setting (Windows) or Manual Feed as the
Paper Source setting (Macintosh) in your
printer software (see page 20 for Windows
or page 26 for Macintosh).
9. When you’re finished printing on thick paper, return the adjust lever to
the m position.
Caution: Don’t move the adjust lever during printing; this could damage your
printer.
Note: If the m paper light flashes, make sure
the adjust lever is set to the ^ position, then
press the m paper button again.