Filter
Top Products
34 Printing From Start to Finish
5. Choose Roll as the Source setting. The Roll Paper Options dialog box pops up:
6. Select the roll paper settings based on the type of printing you’re doing, then
click OK:
7. Select the photo size as the Size setting.
Note: Don’t select any of these settings when printing on roll paper:
PhotoEnhance, Reverse Order, Rotate 180°, Centered or Minimize Margins, or
Sheet or Manual (for Source).
8. Click OK.
9. Click OK or Print.
10. Follow the steps on page 39 to remove your printed photos.
Type of printing
Borderless
checkbox
Auto Cutter setting Roll Paper Options
Print and cut
borderless photos
Checked Normal Cut
(don’t select
Paper-Saving Cut; you
may see a small margin
or images may overlap)
Cut Sheet Mode
(don’t select Banner
Mode)
Print borderless
photos and cut
them yourself
Checked Manual Cut Cut Sheet Mode or
Banner Mode
Print photos,
panoramics, or
banners with
borders
Unchecked Manual Cut or
Paper-Saving Cut (may
leave a small margin)
Banner Mode
(if you selected
Manual Cut, check
Save Roll Paper to
save paper at the
end of your print job)