Filter
Top Products
Preparing
for
a Direct Print Operation
The recommended settings for
Epson
impact dot
matrix
color
printers are as follows:
Gamma correction
SW2-3
SW2-4
SW2-5
Printer Output A
OFF
ON
OFF
Color correction
Impact dot matrix printers
SW2-6
SW2-7
OFF
OFF
The recommended settings for the HP PaintJet color printer are as
follows:
Gamma correction
SW2-3
SW2-4
SW2-5
1
Printer Output A
Color correction
Ink jet printers
SW2-6 SW2-7
OFF
ON
Note:
For explanations on halftoning mode, gamma correction,
and color correction, see Chapter 2.
Using the zoom and brightness modes
When you want to increase or decrease the size and/or lightness-
darkness setting of the image you are going to scan during a direct
print operation, follow these steps:
1.
Place the document face down on the document table and close
the document cover.
D-12
Direct Print Function