Filter
Top Products
Cleaning the Scanner
To keep your scanner operating at its best, you should clean it
periodically.
Clean the outer case with mild detergent dissolved in water.
If the glass of the document table gets dirty, clean it with a soft dry
cloth. If the glass is stained with grease or another hard-to-remove
material, use a small amount of glass cleaner on a soft cloth to
remove it. Wipe off any remaining liquid with a dry cloth.
0
I
.
CAUTION:
l
Be careful not to scratch or damage the glass of the
document table, and do not use anything hard or
abrasive to clean it. A damaged glass surface can
decrease scanning quality.
l
Never use alcohol, thinner, or corrosive solvent to clean
the scanner. These chemicals can damage the scanner
components as well as the case.
l
Be careful not to spill water into the scanner mechanism
or electronic components. This could permanently
damage the mechanism and circuitry.
l
Do not spray lubricants inside the scanner.
l
Never open the case of the scanner.
3-2
Maintaining and Transporting the Scanner