Filter
Top Products
Scanner Components
The
control panel
contains indicator lights that show the status of the
scanner, and buttons for controlling the brightness, zoom, self test,
and direct print features.
DIP switches
(located under the cover) let you select settings for the
direct print function.
Serial
interface
connector
onal parallel interface connector
You connect the power cable to the
power inlet.
The
transportation
screw is shown in its stored position.
If you are using the scanner with an IBM compatible computer, you
connect the computer’s interface cable to the
bidirectional parallel
connector
after installing a bidirectional parallel interface board in
your computer.
If you are using the scanner with a Macintosh computer, you install
the SCSI interface board in the
interface board slot.
You then connect
the computer’s interface cable to the SCSI connector on the board.
The
serial interface connector
is also available where the bidirectional
parallel interface or SCSI interface is not suitable.
Setting Up the Scanner
1-9