Filter
Top Products
Connecting the Scanner to the SCSI Inferface
The Power on Sequence
SCSI devices with terminators (the first and last devices in the daisy
chain) must be turned on before the Macintosh to allow information
to pass through the SCSI interface. The Macintosh may not start up
if these devices are not turned on. SCSI devices in the middle of the
chain may be left off if you don’t plan to use them at this time.
l
If you have an internal hard disk, turn on the scanner and any
other SCSI devices you plan to use. Wait a few seconds; then
turn on the computer.
l
If you have an external hard disk, turn on the scanner, external
hard disk (first on the daisy chain), and any other SCSI devices
you plan to use. Wait a few seconds; then turn on the computer.
Connecting the Scanner to a Macintosh
C-13