Filter
Top Products
Problems and Solutions
Problem Solution
All or part of the
image is distorted on
the CRT display or
on the printed
output document
(continued).
Color is patchy or
garbled at
the
edges
of
the document.
The image is faint or
uneven.
The image is faint or
Check that the document is placed flat
out of focus.
against
the
document table.
If the document is very thick or warped
at the edges, the edges may appear
patchy or garbled. Place opaque paper on
the back of the document covering the
edges
to
avoid interference from external
light.
If a part of
the
document rests outside
the document table, the document’s edge
may be colored. Reposition the document
so that
it rests within the document table.
Check and adjust the gamma correction
setting. The image looks lighter when
gamma correction is set for a printer than
when it is set for a CRT.
Troubleshooting 4-9