Filter
Top Products
Using the Parallel Interface
3.
Connect the 36-pin end of the cable to the bidirectional parallel
interface connector on the back panel of the scanner. Fasten the
connector with the clamps on the sides of the connector.
0
I
CAUTION:
Connect only one interface cable at a time to
.
the scanner. Attempting to connect more than one
interface cable may produce radio interference that
exceeds the specified limits.
Identifying a Cable Problem
If you are using a standard parallel interface cable, the scanner may
not work properly even though the same cable works properly with
a parallel printer. For example, if the fluorescent lamps come on but
the scanner does not start, or if your software does not recognize the
scanner, the wiring of the parallel cable may be incorrect.
Connecting the Scanner to a PC
B-5