Filter
Top Products
Installing the SCSI Interface Board
You install the SCSI board into the option board slot located on the
back panel of the scanner as described below.
CAUTION:
To connect the ES-300C in the middle of a
daisy chain, you must have the terminator resistors
removed from the SCSI board by your dealer before
installing the board in the scanner.
1.
Turn off the scanner and disconnect the power cable and any
other interface cables connected to the scanner.
WARNING:
Always turn off the power and disconnect the
power cable before installing or removing an optional
interface board,
C-6
Connecting the Scanner to a Macintosh