Filter
Top Products
Testing the Scanner
Now that your scanner is fully assembled, you can use its built-in
self test function to see that it is working correctly before you
connect it to your computer. You should perform this test to make
sure the scanner was not damaged during shipping.
Before running the self test, you need to connect the scanner to an
electrical outlet.
Plugging in the Scanner
0
1
CAUTION:
Make sure you have removed the
.
transportation screw before you connect the scanner
to a power source.
1.
Make sure the scanner is turned off.
2.
Firmly connect the power cable to the power inlet at the back of
the scanner.
1-10
Setting
Up the Scanner