Filter
Top Products
Using the DIP Switches
The ES-300C has two sets of DIP switches located under the DIP
switch cover to the left of the control panel.
Change DIP switches in the following cases:
l
If you have a Macintosh Plus computer. (See Appendix C.)
l
When you use the direct print function.
l
When your software cannot specify the functions that are
selectable with DIP switches. (See your software manual.)
Note: Changes made to DIP switch settings while the scanner is
on
will not be effective until you turn the scanner off and then
back on again.
DIP Switch Factory Settings
The DIP switches are set to the following positions at the factory:
OFF
D-4
Direct Print Function