Filter
Top Products
Operating the Control Panel
READY (green)
On when the scanner is
ready to
receive commands from
the
computer software. Flickers during scanning.
ZOOM (orange)
On when the display is in zoom mode. Use the
@
(Increase) and
@
(Decrease) buttons to change
the
zoom value shown
on
the
display when you are using the direct print function.
BRIGHT (orange)
On
when the display is in brightness mode. Use the
@
(Increase)
and
@
(Decrease) buttons to change the brightness value shown on
the display when you are using the direct print function.
The display
% Display (green, three-digit segment)
The display indicates the zoom value when the control panel is in
zoom mode and indicates the brightness value when the control
panel is in brightness mode. It also indicates when an error occurs in
the scanner. The scanner is in the zoom mode when you first turn on
the power.
Buttons
ZOOM/BRIGHT
Pressing this button selects either zoom or brightness.
ZOOM/BRIGHT
works only when the
READY
light is on (when the scanner is in the
ready state). The display is in zoom mode when you first turn on the
power. Use this button to select zoom or brightness only when you
are using
the
direct print function.
Using the Scanner
2-3