Filter
Top Products
Connecting the Scanner to the SCSI Interface
Connecting the Scanner to Other SCSI Devices
If you are connecting more than two SCSI devices in the daisy chain,
you need a 50-pin to 50-pin SCSI peripheral cable.
follow those guidelines could cause damage to or interfere
with operation of the scanner and/or computer.
1.
You must place the scanner (containing the SCSI board with an
internal terminator) at the end of the daisy chain. The order of
connection does not affect the speed of scanning operations.
If you have a Macintosh with an internal hard disk, the hard
disk itself has a terminator and therefore is the first SCSI device
in the daisy chain.
2.
Attach any SCSI devices (without terminators or with terminator
resistors removed by your dealer) to the middle of the chain as
shown in the following illustration.
Internal terminator
Computer SCSI device
ES-300C scanner
CAUTION: Do not connect more than two devices with
terminators to the SCSI interface. Having more than two
terminators connected at one time could cause serious
damage to the SCSI devices on the daisy chain.
Connecting the Scanner to a Macintosh
C-11