Filter
Top Products
Assembling the Scanner
After you’ve found the best place to set up your scanner, the next
step is to assemble the parts.
Removing the Transportation Screw
Before plugging in the scanner, you must remove the transportation
screw. This screw secures the carriage mechanism during transport
to protect it from damage due to shock or vibration.
0
1
I
CAUTION: Do not plug in the scanner before removing
l
the transportation screw.
1.
Place the scanner on a flat, stable surface with the back panel
facing you.
2.
Locate the black rubber stopper in the center of the back panel.
This stopper protects the transportation screw.
3.
Remove the rubber stopper by pulling it straight out toward
you.
1-4
Setting Up the Scanner