Filter
Top Products
Using the SCSI Interface
WARNING:
l
Before handling the SCSI board, first touch a grounded
metal object to release any static electricity on your
body that may cause damage to
the
components of the
board.
0
Hold the interface by its edges and
the
shielding plate.
Do not touch the edge connector or the components
on
the board.
1.
Locate the rotary switch on the SCSI board to check or change
the SCSI ID.
2.
To change the SCSI ID, rotate the small dial on the top of the
rotary switch until the number of the desired ID aligns with the
mark on the dial.
Connecting the Scanner to a Macintosh
C-3