Filter
Top Products
100
**
Figure B-3: Disk Change Notification Page – New Disk
3. Click “Ignore” to continue rebuilding the disk and return to the Manager.
The Disks page shows the progress of the rebuilding progress.
Alternatively, if the information on this page is not correct, click “Scan” to scan the storage
system again and update the page.
You can also click “Shut Down” to shut down the storage system. When you restart the
storage system, this page will re-appear.
A.2 Removing or Replacing Hard Disks
The effect of removing hard disks from your storage system or disk failure varies, depending
on the disk configuration you chose when you configured the system and the current state of
the existing disks.
For example, in a linear configuration, when you remove a disk or a disk fails, the data
associated with that disk is no longer available, but the data on all the other disks remains
available.
In a RAID configuration, the effect of disk removal/failure varies, depending on the RAID level