Filter
Top Products
49
IP address of your email server.
5. If required by your email server, enter a user name and password for logging into that
server in the User name and Password text boxes.
6. If your email server cannot use the default sender email address (root@localhost), or if you
want the individuals who receive email notifications to be able to reply to the alert, enter
the address that you want to appear as the return address in the Sender e-mail address
text box. For example, you could enter your own e-mail address (such as
MyName@MyCompany.com).
7. In the First e-mail address text box, enter the eemail address of an individual who should
receive e-mail notifications when a problem occurs.
8. The email address can be up to 128 characters long and must include the @ symbol (for
example, MyName@MyCompany.com).
9. If you want email notifications to be sent to other individuals as well, enter the appropriate
e-mail addresses in the Second e-mail address and Third e-mail address text boxes.
10. Click “Apply”.
11. When the confirmation message appears, click “OK”.
To confirm that the configuration is correct, click “Test E-mail”, and click “OK” when the
confirmation message appears. This sends a test message to the specified recipients. If they
do not receive the test message, make sure that all the entries on this page are correct. You
might also have to modify the network settings (such as the gateway to use).
3.8 Firmware Upgrades
Clicking on the “Advanced” button in the menu, then clicking “Firmware” on the left menu will
open the Firmware page (Figure 3-19) which displays the current version of the firmware that
is installed on your storage system. It also allows you to upgrade it if newer firmware becomes
available. For additional security, you must enter your administrator password in order to
upgrade the firmware.
Warning: When you upgrade the firmware, the storage system restarts, and
access to the Manager is temporarily interrupted. Users will not be able to
access the shared folders while the system restarts. If users have shared files
open, data might be lost. Be sure to have all users save their changes and
close any open files before you upgrade the firmware.