Filter
Top Products
102
**
Figure B-4: Disk Change Notification Page – Degradation
Take the appropriate action:
• To scan the storage system again and update the information on the page: Click
“Scan”.
• To re-install the same disk or install a new disk: Click “Shut Down”. After the storage
system shuts down, install the disk and then restart the system.
Note: If you are re-installing multiple disks, be sure to re-install them in the
opposite order than you removed them.
• To return to the web interface and continue to operate in a degraded mode: Click
“Ignore”.
Responding to RAID failure
When disk removal/failure causes the entire RAID to fail, the Disk Change Notification page
appears when you access the Manager or refresh the browser window (Figure B-5).