Filter
Top Products
11
1 or RAID 10 is used, GREEN when RAID 5 is used, and is off if no
RAID is used.
1.6 Rear Panel
The rear panel (Figure 1-2) contains the system fan, power supply, USB 2.0 ports, gigabit LAN
port, power cord connection, and reset button.
Figure 1-2: Rear Panel
USB 2.0 Ports
The USB ports can be used to connect USB printers and external storage to
the freeStor 4020. USB hubs are not supported by these USB ports.
Power Outlet
Supplies power to the device.
Gigabit LAN Port
Gigabit Ethernet connection. The right LED lights up GREEN when
connected to a 10/100 Mbps network, and ORANGE when connected to a
gigabit network.
Reset Button
Press the “Reset” button for three seconds the unit to system defaults.
1.7 Requirements
Before using the freeStor 4020, the following minimum requirements must be met:
Web Browser
Microsoft Internet Explorer 6.0 or above or Mozilla Firefox 1.06
or above
Network Environment
TCP/IP network environment