Filter
Top Products
freeStor 4020 User’s Manual
54
• Password: The password used to log into the web interface.
• Confirm password: If changing the password, must match the password entered in the
Password textbox.
The user name and password are case-sensitive.
2. Click “Apply”.
3. When the confirmation message appears, click “OK”.
3.11 Network Settings
Clicking on the “Advanced” button in the menu, then clicking “Network” on the left menu will
open the Network page (Figure 3-22) which displays the network settings that were set when
you initially configured the storage system.
Note: Changing the IP address or subnet mask can have several effects. If you
access the Manager using the Storage System Console or using the storage
system’s IP address, access to the Manager will be disrupted and you will have
to access it again using the new IP address. Users who accessed the shared
folders using the previous IP address will be disconnected and must access
them again using the new IP address. Users who backed up their disks to the
storage system using the previous IP address must remove protection for all
affected disks and protect their disks again, removing the storage system from
the list of backup locations and adding it again using the new IP address.
Users who backed up their disks to the storage system using the storage
system name do not have to remove protection from their disks or remove the
storage system from the list of backup locations. However, they must start
DiskSafe Express so that it can retrieve the new IP address.