Filter
Top Products
6.6 Installation
6.6 Installation
Notes on installation:
Do not block the ventilation slits.
Do not install the M600 main cabinet where it will be exposed to sunlight or sources of heat.
Do not install the M600 main cabinet in dusty places or places where it will be exposed to
corrosive gas or sea breeze.
Keep the M600 main cabinet isolated from vibration. Install the M600 main cabinet on a level
surface so that it does not tilt.
Make sure that the AC power supply source is grounded properly. Otherwise, the M600 main
cabinet may malfunction.
Do not run a cable under a unit or allow a cable to become taut. Do not disconnect the power
cable when the power is on.
Do not place anything on the M600 main cabinet. Do not use the cabinet of the M600 main
cabinet as a work space.
In winter, to prevent condensation in the M600 main cabinet, do not raise the ambient
temperature rapidly. Use the M600 main cabinet only after it has warmed up sufficiently.
Do not install the M600 main cabinet near a noise generating device such as a photocopier, air
conditioner, or welder.
Take electrostatic prevention measures. Note that some carpets generates static electricity
easily and can cause the M600 main cabinet to malfunction.
When moving the M600 main cabinet, do not pull on the front cover. Otherwise, the main
cabinet may be damaged.
IMPORTANT
If the above conditions are not satisfied, the M600 main cabinet may be damaged. Be sure
to follow these precautions.
77