Filter
Top Products
9.4 Installation
IMPORTANT
High Leakage Current may flow through Power Strip Earthing Conductor, if all power
supply cords of this unit are connected to one Power Strip. Earth connection essential
before connecting supply.
Table 9.3 Mounting Combination for Expansion Rack
Rack-Mount Units
Mounting Portion Priority in the Rack
Expansion File Unit Type-2
Disk Array Unit (GP-DxxxxU)
Disk Array Unit (GR700/720)
GP7000F Model 200R/400R
Outlet and/or Outlet Type-2
Upper
Lower
Communication Swichable Unit
GP7000F Model 600R
Note: Each rack-mount unit should be mounted in the lowest available portion with the
priority indicated in the Table 9.3 .
Notes on Installation
Do not install this file unit where it will be exposed to sunlight or sources of heat.
Do not install this file unit in dusty places or places where it will be exposed to corrosive gas or
sea breeze.
Keep this file unit isolated from vibration. Install this file unit on a level surface to prevent it
from tilting.
Do not run a cable under a unit or overextend a cable. Do not disconnect the power cable while
the power is on.
Do not place anything on this file unit. Do not use this file unit as a desk.
To prevent condensation in this file unit, do not raise the room temperature rapidly in the winter.
Use the cabinet only after sufficiently warming it.
Do not install this cabinet near noisy devices such as a photocopier, air conditioner, or welder.
Take electrostatic prevention measures. Note that some carpets generate static electricity easily
and can cause this file unit to malfunction.
IMPORTANT
If the above conditions are not satisfied, this file unit may be damaged. Be sure to follow
above precautions.
111