Fujitsu M400R Computer Hardware User Manual


 
Important Warnings
The following are cautions found in this manual. They have been compiled here with corresponding page
references.
CAUTION
A hazardous situation could result in minor or moderate personal injury if the
user does not perform the procedure correctly. Also, damage to the product or
other property may occur.
Task Warning
Normal Operation Data destruction: Pressing the RESET switch while the
system is running may destroy data.
System Installation Be sure to install software packages from "Basic Software
Extension" or "Enhanced Support Facility. Otherwise, above
switch functions or proper messages on LCD panel are not
guaranteed.
Terminal break command If used improper commands at the ok prompt, the GP7000F
may be destroyed. If you need to used any other commands
except shown on this manual, you should well understand
the function and usage of the command before using it.
Power Off Be sure to eject backup tape media and any diskettes before
power-off the system, if the media are installed. Other
wise, the data on the media may be destroyed.
Normal Operation Except in an emergency, never turn off the AC switch or
disconnect the power cable wile the GP7000F main cabinet is
turned on. If you do, data in the disk drive may be
destroyed.
viii