Filter
Top Products
CHAPTER 10 Expansion File Unit (GP7B7FU1xx)
10.1 Product Outline
Key Features
2 separate 40MB/s differential UltraSCSI connections to the host per Expansion File Unit.
Up to 5 UltraSCSI disk units can be installed per UltraSCSI bus, and up to 10 UltraSCSI disk
units can be installed per Expansion File Unit.
The disk units can be hot-swappable.
The power supply unit can be configured redundantly, and it can be hot-swappable when
configured redundantly.
Fans are configured redundantly to continue working even if a fan is failed.
The Expansion File Unit has some status LEDs inside the cabinet, as well as a CHECK LED
and a POWER LED on the front panel. It makes easy to identify/isolate hardware problems.
The Expansion File Unit is connected to the GP7000F main cabinet through a RCI (Remote
Cabinet Interface) cable as well as UltraSCSI interfaces. The RCI makes power cycle of the
cabinet linking to the GP7000F main cabinet.
Front View of the unit
POWER LED
( green )
CHECK LED
( amber )
Front Cover
Air Inlet
Figure 10.1 Front View of Expansion File Unit
114