Filter
Top Products
7 Command-Line Interface
-M
Specifies that the managed system is a management blade server. The
parameters -T and -I must also be specified to enable communication
with the TFTP server (the latter parameter is only required in the Start-
Flash) command.
-B
Specifies that the managed system is a connection blade server. The
parameters -T and -Z must also be specified. -T in order to enable com-
munication with the TFTP server,-Z in order to specify the IP address of
the management blade server, since inventory data for the connection
blade server is collected and provided via the management blade server.
-E
Specifies that the managed system is an iRMC. The parameters -T and -
Y must also be specified, -T in order to enable communication with the
TFTP server,-Y because the data for the VersionView.sav file cannot be
collected by the program and an external inventory is required.
-Z <IP-addr>
IP address of the management blade server. The IP address is only need-
ed for updating connection blade servers (see option -B).
-T <IP-addr>
IP address of the TFTP server for updates via TFTP server (for example,
in case of a management blade or connection blade).
-I {<IP-addr> | NO_ADDR}
Update IP address of the management blade for updates via TFTP server.
This address must be unique across the network. In the case of newer
management blade versions (for example, MMBS3), where it is not nec-
essary to specify an IP address, you must specify NO-ADDR here.
-Y <path>
Absolute path of the Inventory file "VersionView.sav" of the managed sys-
tem.
Mandatory on Linux if the managed system is a management blade or con-
nection blade or if the managed node is an iRMC.
228 ServerView Update Management