Filter
Top Products
3.2.1 Updating a hardware system
Updating a hardware system taking a management blade as an example
Figure 3: Diagram of the update procedure (management blade via TFTP
server)
1. The Inventory Manager on the management server uses SNMP com-
mands to fetch the required inventory data from the management blade.
When you are updating via the graphical user interface the data is pre-
sented on the graphical user interface.
2. The Update Manager compares the inventories entered in the database
with the software and firmware components in the repository. Based on
the differences arising from this comparison, it then creates a list of
components and servers that need updating.
3. BX600 MMB S2 only:
The login for HTTP is checked. This is done directly with the man-
agement blade using HTTP commands.
Update via Update Manager Linux: Login is checked during update.
ServerView Update Management 39
3.2 Update via TFTP server