Filter
Top Products
3600 Printer Maintenance Manual
2-8
Cleaning the Rollers and Tear Bar
Cleaning the platen roller and the tear bar preserves print quality by ensuring
close contact between the media and the printhead. The TTR roller, liner roller,
and media roller are cleaned in the same fashion to minimize general debris
and to maximize their efficiency.
To clean the rollers and tear bar
1. Remove the media cover.
2. Raise the printhead by rotating the head lift lever clockwise until the
printhead releases.
3. Remove the media from the paper path and the ribbon (if installed) from
the TTR hubs.
4. Clean the rollers with a lint-free cloth moistened in isopropyl alcohol. Wipe
the cloth over the rollers, rotating each roller so that you clean all of it.
Power
Intermec
3600
Alert
Feed/Pause
Empty/Pause
3600M.013
Platen
roller
Tear
bar
TTR
roller
Media roll
roller
Liner
roller
5. Clean both sides of the tear bar with a lint-free cloth moistened in isopropyl
alcohol. Remove all traces of dust, paper, and adhesive.
6. Reload the media (and ribbon if used) and then engage the printhead by
turning the head lift lever counterclockwise until the printhead locks.
7. If you are finished cleaning, install the media cover.