Genicom 3600 Printer User Manual


 
3600 Printer Maintenance Manual
c39 c39
frank
3-8
Software Configuration
This three-label set lists current configuration parameters that are set from the
host computer. It also lists defined pages, formats, graphics, fonts, and
installed options. This label serves as a configuration reference as well as an
alphanumeric and multiple label alignment and print test.
1 2 3 4 5 6 7 8
OFF
1 2 3 4 5 6 7 8
ON
OFF
ON
BAUD RATE - 9600
DATA BITS - 7
MESSAGE LENGTH - 255
PARITY - Even
STOP BITS - 1
PROTOCOL - Xon/Xoff No Status
DEVICE ADDRESS - A
INTERNAL OPTIONS - none
EXTERNAL OPTIONS - Self Strip
PRINT SPEED - 3.0 IPS RIBBON SAVE - Disabled
IMAGE BANDS - 3 SELF STRIP - Disabled
MAX LABEL LENGTH - 4 inches CUTTER - Disabled
LABEL STOCK - Inter- label gap DARK ADJUST - 0
MEDIA TYPE - Direct Thermal X FORMS ADUST - 0
MEDIA LENGTH - 0 inches Y FORMS ADJUST - 10
CHARACTER SET - US ASCII LABEL REST POINT - 0
TRANSLATION - Disabled SENSITIVITY - 420
EMULATION - Disabled
LABEL RETRACT - Enabled
Program Version : 1.1
Pages Defined : 0
Formats Defined : 0, 19
Fonts Defined : 0, 1, 2, 7, 20 21, 22, 23, 24,
25, 30, 31, 32, 33, 34, 35, 36,
37, 38, 39, 40, 41
Graphics Defined : none
3600M.024
Print Quality
This label contains bar codes and human readable fields that you can use to
determine whether the printer you are testing is attaining the best print quality
possible. If you notice problems with the print quality, check and perform the
adjustment and alignment procedures provided in this chapter to achieve
optimum printer performance.
CODE 39 3.0 /1
1 2 3 4 5 6 7 8
OFF
1 2 3 4 5 6 7 8
ON
OFF
ON
CODE 39
2.5 / 1
*PICKETFIELD*
*PICKET FIELD*
INTERMEC
INTERMEC Corporation
Everett, WA 98203
*SUPPLIER*
*SUPPLIER*
CODE 39
3.0 / 1
*PICKETFIELD*
*PICKETFIELD*
*PICKET FIELD*
*PICKET FIELD*
CODE 39
CODE,39,3.0./1
CODE,39,3.0./1
MODEL
3600
Prog 062198
Version 1.1
3600M.025