Filter
Top Products
c39 frank
Testing and Adjusting
3-7
3
Printing Test Labels
The test labels can be used for checking printhead alignment, printhead bias,
dots out of specification, label tracking, and ribbon wrinkling. The examples
show the DIP switch settings that select the illustrated label.
Hardware Configuration
The hardware configuration label is the first label printed when you enter Test
and Service mode. This label serves as a configuration reference as well as an
alphanumeric and alignment print test. This label contains the following
information and uses:
• Printer memory including both storage and image RAM.
• Printer mileage including inches processed and inches burned.
• Printhead settings including width, dot size, and burn pot setting.
• Firmware checksum, program, and version number.
• Vertical lines for evaluating printhead alignment.
To achieve the highest quality label, print the hardware configuration label at a
speed of 3 ips (inches per second).
1 2 3 4 5 6 7 8
OFF
1 2 3 4 5 6 7 8
ON
OFF
ON
3600 Hardware Configuration
Memory Installed
Storage RAM : 128 kilobytes
Image RAM : 382 kilobytes
Flash RAM : none
Mileage
Inches Processed : 540
Inches Burned : 204
Labels Cut : 0
Printhead
Width : 1344 dots
Dot Size : 5.0 mil
Burn Pot Setting : 213
Hardware Options
I/O Option : none
Internal Option : none
External Option : Self Strip
Firmware Checksum
ROMO (U9) : FAC3
ROM1 (U8) : OC3E
Program : 062198
Version : 1.1
3600M.023